Snowmobile Fanatics banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
1) The engine runs great when i feed the gas in manually, the machine has a two wire ignition with no start/reset position.
the fuel pump comes on if i wire it directly to the battery.
I have no power to the ecu as far as I see.

2)there is a plug up near the ignition switch with a red, red and blue, and red and white and they are heavier gage compared to the rest of the wires,
i see one of them goes to the fuel pump relay....... any ideas what these are for????
 

·
Registered
Joined
·
9,987 Posts
There should be more than two wires to the ignition switch..

I don't have access to a schematic right now, but if you go to mrholmquist's gallery, I believe that he has a schematic in there you can look at.
 
1 - 2 of 2 Posts
Top