Snowmobile Fanatics banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,427 Posts
Discussion Starter · #1 ·
Does anybody know what the jet settings are for a 95 xlt 600 with psi modblaster pipes?
 

·
Registered
Joined
·
1,427 Posts
Discussion Starter · #2 ·
it has the blue spring in the clutch and the prefered weights in it
 

·
Registered
Joined
·
1,427 Posts
Discussion Starter · #3 ·
nobady knows now come on i know theres people put there with xlt that hv them on
 

·
Registered
Joined
·
1,427 Posts
Discussion Starter · #4 ·
does anybody think this will work?

38 mm carbs
45 pilots,
air screw 1 1/2 turns,
247 Q0 nozzle,
6DP10 needle #3. Or 35 pilot,
air screw 1/2 turn,
247 Q2 nozzle,
6DH7 needle #3.
Both use a 2.5 cutaway.

38mm carbs
try the needle clip position at 3 -4 or even # 5
the pilot should be at least # 35
the air screw at 1 1/2 to 2 turns out.
you should confirm what needle jet is in it QO ?? Q2 ? big diff here

39.2 mm carbs
Pilot # 45
slide #2.5
needle jet # 247 # Q-2
jet needle #6DH7
main jets # 300 -320 depends on weather
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top