Snowmobile Fanatics banner

1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Ok, I had posted this in the ac topic and got no response so I hope someone here can help!! So I finally found a suspension to put in my 92 wildcat, thats the good
. I couldnt get the measurements from the donor sled thats the bad . If anyone can provide these measurements that would be awesome. I need the c to c distance from the drive shaft to the upper suspension mounting hole, and the c to distance from the top suspension mounting hole to the back hole. The suspension came out of a 1997 zr 580 and has the tsl suspension, i know some of the 97's did not, but this one does.
Also if this should be posted somewhere else let me know. Thanks, Rory
 

·
Registered
Joined
·
2,505 Posts
Measure the length of the front arms. they should be about 2" longer. You would then have to make new mounting holes 2" forward to mount it correctly.
 
1 - 2 of 2 Posts
Top