Snowmobile Fanatics banner
1 - 1 of 1 Posts

4 Posts
Discussion Starter · #1 ·

My machine runs erratic. When it starts, sometimes it runs fine..lights come on, all gauges work, tach goes up to 2500rpm at idle, can give it gas and engage clutch and machine will move. I can shut it off and restart and it might operates the same, sometimes it will only idle, no gauges or lights work, will bog down if I try to give it gas.

I have verified the DESS cap is clean and that it is seated properly. Have also verified that all connectors are seated properly.

Please let me know if you have any ideas

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.