Snowmobile Fanatics banner

1 - 20 of 27 Posts

·
Registered
Joined
·
1,182 Posts
Discussion Starter #1
Going to a newer fuel injected sled.....

98 XC 700 with 220 jugs
slp power packs
slp single pipe and can
Clutch kit
Edge skid just installed has about 40 miles on rebuilt fox clicker shock
low windshield
BRAND NEW dually carbides, installed in garage never ridden....
no rips in seat, few cracks in hood
Also have hole shot skid plate never installed sitting in box
have original exhaust that goes with it.

suspension is pretty soft Im 300 and it bottoms out, if I keep it Im putting in the heavier torsion springs in it.

Tons of power with this set up, from anything on the trail ljust pin the throttle and its instant, very strong down low using the torque this motor is known for.....

1600 or best offer...I have over 400 in the skid, 250 in the pipe, and the clutch kit, and over 100 in the carbides alone.
 

·
Registered
Joined
·
690 Posts
pics please
 

·
Registered
Joined
·
1,182 Posts
Discussion Starter #3
Here are some pics...I didnt have a ton with the edge set up.

Also I will get some more under hood pics in the next few days. These pics were from last year with the stock set up.....












PS - I may be willing to meet. But at this price Im just looking to unload it.

Wife told me to go buy a new one.... so I gotta strike while the gettins good.
 

·
Registered
Joined
·
1,182 Posts
Discussion Starter #4
Sorry I orinally bumped it....

For the 1600 I have a really nice cover that goes with it, it covers teh entire front end all the way over the ski loops. Sure is nice to trailer it with this on.

I also have the original smoked windshield the mid height one.

Also if no serious offers by Sunday night it gets parted. I have 5-6 people waiting on certain parts. Not trying to be a jerk but would rather lose a few bucks selling it outright and NOT have the hassle of tearing it all apart. But sometimes gotta do what ya gotta do.

I bought a brand new Apex RTX
 

·
Registered
Joined
·
690 Posts
pics dont work
 

·
Registered
Joined
·
15,722 Posts
Pics work just fine and bumping is frowned upon here.
 

·
Registered
Joined
·
1,182 Posts
Discussion Starter #9
If no offers by tomorrow I start to piece it out.

Carbs are already spoken for as well as the Power packs.
Someone PM'd me on the CDI

Everything else will be parted.
 

·
Registered
Joined
·
690 Posts
can you deliver to ohio
 

·
Registered
Joined
·
690 Posts
not interested anymore i found a sled i might buy around here, thanks
 

·
Registered
Joined
·
32 Posts
have you parted it out yet? i am interested if you have, or haven't i will take the whole sled, or jsut the engine. i will coem pick it up, my offer as a whoel is 1,200 and ill be down there next weekend w/ cash
 

·
Registered
Joined
·
1,182 Posts
Discussion Starter #15
1200 for an XC 700 with edge skid? I have to pass.

I havent parted it out yet. With the new snow we got I figured I would keep it whole until spring now.

If your interested in the engine give me an offer, I dont want to part it until I can move a few big parts first. Hate to sell a handfull of twenty dollar parts and then it sits.

I would trade entire sled for nice open car trailer with elec brakes and title.
 

·
Registered
Joined
·
1,182 Posts
Discussion Starter #17
Sorry havent checked the compression. Been meaning to pick up a guage but just havent. I may be interested in keeping the skid, but I would rather not have to pull the track.

I would do 1150 and I keep the skid.
 

·
Registered
Joined
·
32 Posts
you keep the skid and track? or just the edge skid? and I can't make a decision unless you check compression. but $1,150 with no skid and 5500 miles I think you can do me a little better than that. thanks! Drew
 
1 - 20 of 27 Posts
Top