Snowmobile Fanatics banner

1 - 3 of 3 Posts

·
Registered
Joined
·
634 Posts
Discussion Starter · #1 ·
ok syncing my carbs, im using HANGMAN'S methode from this post- http://www.snowmobilefanatics.com/forum/topic/110538-carb-syncing - but in the step about making sure the slides open all the way and out of view in the venturi, do they open all the way on both sides,ie: engine and air box side, or just on one side? Thanks in advance.[thumb]
 

·
Registered
Joined
·
1,109 Posts
Just make sure it's opening all the way on the airbox side. Use your finger to feel that the slide is high enough in the venturi not to restrict airflow. The slide should be pretty much flush with the venturi at WOT. Not too high, or obviously not low as that will reduce your WOT.
 

·
Registered
Joined
·
634 Posts
Discussion Starter · #3 ·
Great, thanks. Thats what i needed. [thumb]
 
1 - 3 of 3 Posts
Top