Snowmobile Fanatics banner

1 - 20 of 29 Posts

·
Super Moderator
Joined
·
11,279 Posts
Old one I use to have. Stock other then a 1.5 paddle track and DG stingers,best sounding sled iv owned.
39.jpg
 

Attachments

·
Registered
Joined
·
2,429 Posts
This is the 96 ZRT 600 I got rid of last year.

200511623337_3872.jpg

200531422021_3872.jpg

11896.jpg


I still think ACM has one of the best looking Zerts I have seen!
 

Attachments

·
Registered
Joined
·
1,716 Posts
It's built on the same ZRT I chassis, with the same motor, so I'll put Mine in.
98 EXT Triple

As I bought it.
20094516596325_13437.jpg 20094516582212_13437.jpg
20094516585716_13437.jpg 200945165741887_13437.jpg

As I Rode it last season.
201011715491963_13437.jpg 201011715485041_13437.jpg
20101011162615449_13437.jpg

And How I'll ride it this yr.
2010819114524579_13437.jpg 2010819114458485_13437.jpg
2010819114428391_13437.jpg 20101011162951543_13437.jpg

144"x1-1/4" Ripsaw, Tracks USA Tip up Extension's on a 98 ZR skid, AGLT 43" Front suspension conversion with Fox Sno Pro Clicker's, Steering post Forward mod.
The only thing left to do before putting the motor in, is to find and install a Purple Skid Plate.



Rick
 

Attachments

·
Registered
Joined
·
17 Posts
Discussion Starter · #8 ·
hey i got a question... i need a my seat is ripped and would a seat cover work good or should i get it redone ? thanks
 

·
Registered
Joined
·
1,716 Posts
hondaxlt0495 said:
hey i got a question... i need a my seat is ripped and would a seat cover work good or should i get it redone ? thanks
Not sure what year your's is.
If it's a 95-96 this is the cover you need.
https://www.sledseats.com/catalog_detail_view.php?pid=2414mc

If it's a 97-98 this is the one to get.
https://www.sledseats.com/catalog_detail_view.php?pid=2406mc

The price on either one is $124.99, in whatever color combo you want. (as long as they have those colors available.)

The cover on Mine is the 2406mc, I also put one of their cover's on My 90 Prowler.
I've been very happy with the quality of their cover's, and the ease in installing them.

It only take's about an hour a needle nose plier's, and a staple gun to strip the old cover, and install the new one.
One small hint is to wrap your foam in a plastic bag before installing the new cover.
This will help keep your foam from soaking up any water that get's through the cover seam's.

Also when installing a new cover, don't make it overly tight, as it will shrink up some from the sun and heat.
If you install it too tightly, it will start to split the seam's a lot sooner than it should.

No Cover wil last forever, but if installed improperly, they will come apart a lot sooner than nescessary.

This is a pic of the cover I put on My Prowler this summer, I asked for a color pattern that is the reverse of what is common.
It only took them a week to make the cover and have it at My door.
2010109135246515_13437.jpg


Rick
 

Attachments

·
Registered
Joined
·
1,479 Posts
Festus33 said:
It's built on the same ZRT I chassis, with the same motor, so I'll put Mine in.
98 EXT Triple

As I bought it.
20094516596325_13437.jpg 20094516582212_13437.jpg
20094516585716_13437.jpg 200945165741887_13437.jpg

As I Rode it last season.
201011715491963_13437.jpg 201011715485041_13437.jpg
20101011162615449_13437.jpg

And How I'll ride it this yr.
2010819114524579_13437.jpg 2010819114458485_13437.jpg
2010819114428391_13437.jpg 20101011162951543_13437.jpg

144"x1-1/4" Ripsaw, Tracks USA Tip up Extension's on a 98 ZR skid, AGLT 43" Front suspension conversion with Fox Sno Pro Clicker's, Steering post Forward mod.
The only thing left to do before putting the motor in, is to find and install a Purple Skid Plate.



Rick
where can i find an extension like that
 

·
Registered
Joined
·
776 Posts
Can I join in? It says its a 600 on the hood.





 

·
Registered
Joined
·
117 Posts
man that thing is beautiful, i want to put some green on mine , i def want to start with the seat, first i need to start with traction issues
 

·
Super Moderator
Joined
·
15,519 Posts
buckfever said:
I still think ACM has one of the best looking Zerts I have seen!
Hey thanks alot for that! I got alot of time and money and mods into her.. Been running that engine since I joined this forum in 2001
 

·
Registered
Joined
·
1,716 Posts
teamarctic14 said:
144"x1-1/4" Ripsaw, Tracks USA Tip up Extension's on a 98 ZR skid, AGLT 43" Front suspension conversion with Fox Sno Pro Clicker's, Steering post Forward mod.
The only thing left to do before putting the motor in, is to find and install a Purple Skid Plate.



Rick
where can i find an extension like that
[/quote]

The rail extensions are from Tracks USA, the tunnel extension was custom fabricated using the back section from a 98 ZR tunnel.
I wanted it to keep the factory look, and that was the easiest way to do it.

Rick
 

·
Registered
Joined
·
1,791 Posts
I will have to admit, Cat did it right with the ZRT...always love the sound of a ZRT.
 

·
Registered
Joined
·
1,479 Posts
Festus33 said:
teamarctic14 said:
144"x1-1/4" Ripsaw, Tracks USA Tip up Extension's on a 98 ZR skid, AGLT 43" Front suspension conversion with Fox Sno Pro Clicker's, Steering post Forward mod.
The only thing left to do before putting the motor in, is to find and install a Purple Skid Plate.



Rick
where can i find an extension like that
The rail extensions are from Tracks USA, the tunnel extension was custom fabricated using the back section from a 98 ZR tunnel.
I wanted it to keep the factory look, and that was the easiest way to do it.

Rick
[/quote]

ok great im going to look for a rail extension unless someone has 136in rail i can just swap everything over
 

·
Registered
Joined
·
2,429 Posts
arcticcatmatt said:
buckfever said:
I still think ACM has one of the best looking Zerts I have seen!
Hey thanks alot for that! I got alot of time and money and mods into her.. Been running that engine since I joined this forum in 2001
I remember when you got the 97 zrt after your accident. I know you put a bunch of work into! Just by reading the post's when you were building it.

Now was that a black hood at one time? Because I never have seen another one with a orange hood. The orange on that zrt chassis just looks sharp!
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #18 ·
Festus33 said:
hondaxlt0495 said:
hey i got a question... i need a my seat is ripped and would a seat cover work good or should i get it redone ? thanks
Not sure what year your's is.
If it's a 95-96 this is the cover you need.
https://www.sledseats.com/catalog_detail_view.php?pid=2414mc

If it's a 97-98 this is the one to get.
https://www.sledseats.com/catalog_detail_view.php?pid=2406mc

The price on either one is $124.99, in whatever color combo you want. (as long as they have those colors available.)

The cover on Mine is the 2406mc, I also put one of their cover's on My 90 Prowler.
I've been very happy with the quality of their cover's, and the ease in installing them.

It only take's about an hour a needle nose plier's, and a staple gun to strip the old cover, and install the new one.
One small hint is to wrap your foam in a plastic bag before installing the new cover.
This will help keep your foam from soaking up any water that get's through the cover seam's.

Also when installing a new cover, don't make it overly tight, as it will shrink up some from the sun and heat.
If you install it too tightly, it will start to split the seam's a lot sooner than it should.

No Cover wil last forever, but if installed improperly, they will come apart a lot sooner than nescessary.

This is a pic of the cover I put on My Prowler this summer, I asked for a color pattern that is the reverse of what is common.
It only took them a week to make the cover and have it at My door.
2010109135246515_13437.jpg


Rick


thanks
 

·
Super Moderator
Joined
·
15,519 Posts
buckfever said:
arcticcatmatt said:
buckfever said:
I still think ACM has one of the best looking Zerts I have seen!
Hey thanks alot for that! I got alot of time and money and mods into her.. Been running that engine since I joined this forum in 2001
I remember when you got the 97 zrt after your accident. I know you put a bunch of work into! Just by reading the post's when you were building it.

Now was that a black hood at one time? Because I never have seen another one with a orange hood. The orange on that zrt chassis just looks sharp!
Yep.. hood is black stock! Can't believe I am still riding, breaking and wrenching on this sled every year.. I take some pride in it.

Its not what you buy, its what you build.

Lots of sleds in this thread make me smile... I LOVE it when people drive old muscle sleds.
 
Joined
·
1,792 Posts
buckfever said:
This is the 96 ZRT 600 I got rid of last year.

200511623337_3872.jpg
I would've kept the sled and got rid of the backwards picture taking camera.
 
1 - 20 of 29 Posts
Top