Snowmobile Fanatics banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #1 ·
well...once againg i have a new question i need answered quick...how can you reinstall a 1990 AC prowler 121" suspension with all the limiting straps?
I took it off cause it needed new bearings, shock and limiting strap in front and now the suspension bolts are not lining up
the back ones are almost 2" too far past the rear hole...it wasnt like this when i took it out



PLEASE HELP ME!!!
 

·
Registered
Joined
·
9 Posts
I had the same problem at the start of the season with my 1990 El Tigre EXT. Replaced all the wheels, bearings and straps. I had to let the pressure off of the rear springs and let them hang. I put the front bolts in first then I worked the rear section of the suspension up and down until the bolts lined up. After putting the rear bolts in, I put the spring arms back through the plastic guides and then bolted them back on the front idler wheel axle. Hope this helps.
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #4 ·
i got it fixed, my shock was bent, and i jsut had to compress it, thanx guys!
 

·
Registered
Joined
·
1,669 Posts
Discussion Starter · #5 ·
i got it fixed, my shock was bent, and i just had to replace it witha KIPMEX pro-gold gas, and compress it to make it fit, thanx guys!
 
1 - 5 of 5 Posts
Top