Snowmobile Fanatics banner

1 - 8 of 8 Posts

·
Registered
Joined
·
284 Posts
Discussion Starter #1
will a secondary clutch off of a 99 xc600 fit on a 02 xc800??
 

·
Registered
Joined
·
284 Posts
Discussion Starter #3
will i have to make any adjustments to the secondary, like will it open too fast because my sled has more power.....the problem with mine is, it opens wide as soon as i give it gas, i dissasembled it and cleaned it good, put it back on and it still does the same thing
 

·
Registered
Joined
·
520 Posts
Sounds like your not preloading the spring/cam correctly. The 800 will have a different cam. Look in the performance section should be something there on how to set up a secondary the proper way.
 

·
Registered
Joined
·
5,400 Posts
I agree, you need to turn the inner sheave 1/3rd turn, while keeping the outersheave in place before you lock it in with the retaining ring.
 

·
Registered
Joined
·
3,029 Posts
yup what these guys said, theres really not much that can go wrong with a secondary. Put some preload on that sucker and you'll be fine.
 

·
Registered
Joined
·
284 Posts
Discussion Starter #7
well i just found out that the buttons are gone, they are worn right down to the metal...the guy who had this sled before me, didn't do any maintnace, it still had the origional grease in all of the joints....
 

·
Registered
Joined
·
284 Posts
Discussion Starter #8
will a 04 switchback800 secondary fit on my 02 xcsp800
 
1 - 8 of 8 Posts
Top