Snowmobile Fanatics banner

1 - 2 of 2 Posts

·
Registered
Joined
·
144 Posts
i just took mine off and painted them actually. all u have to do is un bold the shock from the chassis and the spindle and then take it out. once that is done, take all of the tension off of the sprink with the plastic nut. mark it though with a sharpie so u know how tight it was. then on the bottom end wehre it mounts to spindle that aluminum washer should slip off of the cylinder and the spring should slide right off.
 
1 - 2 of 2 Posts
Top