Snowmobile Fanatics banner

1 - 4 of 4 Posts

·
Registered
Joined
·
580 Posts
Discussion Starter #1
my son has secondary off and is taking off primary as we speak. what brand and springs do you guys recommend for his setup. Has triple slp pipes. also how hard is it to replace the sheeve bushings? how do you get the helix out?

also 1 spacer/shim feel out of the sec. it fits inside the shaft hole. we found 4 more that were in the back of sled. whats the scoop on this? they are about 1/4 to 1/2 thick with hole in center for secd bolt to go thru.

he wants it to rip from corner to corner not for lake runs!!!!


neighbor has clutch springs compress tools,etc.
 

·
Registered
Joined
·
1,427 Posts
i don't know what kind of springs to get but u should put a blue with 10mr weights one in the primary. and a red one in and switch the positon in the secondary
 

·
Registered
Joined
·
580 Posts
Discussion Starter #3
colors are different from brand to brand. when you say blue and red, are these polaris colors?
 

·
Registered
Joined
·
1,427 Posts
the springs i hv in mine are epi's
 
1 - 4 of 4 Posts
Top