Snowmobile Fanatics banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I just replaced the choke lever on my sons 79 enticer 340 delux and cant get the machine to run. does anybody have the correct settings for this carb? Please let me know turns of screws ect. thanks in advance Tom
 

·
Registered
Joined
·
14 Posts
Hi there, for the pilot screw, screw it back in until it bottoms but not too tight and then turn it about 1 turn counterclockwise. And for the throttle cable, there should be just a little bit of freeplay in the thumb before the butterfly opens. As of the idle adjustment, it's kind of a guessing game. Turn that screw counterclockwise until it doesn't touch the throttle lever and then screw it back in just so it opens the butterfly a little bit. You can play with that later when it'll be running. Let me know how it turns out.

A low windshield is nice, but frostbite isn't
 

·
Registered
Joined
·
266 Posts
Make sure there is a tad of free play in the choke cable too!

Spaceman
Mean Green Racing
Elyria, Ohio
 
1 - 3 of 3 Posts
Top