Snowmobile Fanatics banner

1 - 8 of 8 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter · #1 ·
This suspension is in excellent condition, It is off of a 98 Indy 500 Classic. Length is 121
TO view some pictures go to the site here:
http://members.shaw.ca/jhill1504/snowmobile%20suspension.htm

I am asking 200US, shipping to anywhere in canada wouldn't be to much either and depending on where you are in the states it wouldn't be either.

The skid will be taken out soon and when it is I will have some more pics of it.
You can email me at [email protected] if you have any questions or if you want to make an offer.

Forgot to say that it has 2000 miles on it
 

·
Registered
Joined
·
13 Posts
pssssst... hey John,
there's a couple of people on this board that would like you to post the mounting hole locations for the xtra-12.
thx
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #3 ·
I know :). Within the next few weeks I will see if I can get you some measurements. Have to wait till i get the holes drilled for the Xtra-10.
You could also try talking to your dealer to see if he can provide you with the measurements. Just a thought though.
 

·
Registered
Joined
·
521 Posts
Here are the measurements for an extra 12 rear in an evovled chassis sled.

-From the center of the steering hoop tube, the front mounting bolt is 3/8" towards the front of the sled.

-From the top of the tunnel to the center of the front bolt is 5 3/8"

-From center of each bolt 23 3/4"

-From the top of the tunnel to the center of the back bolt is 4 5/8"
 
1 - 8 of 8 Posts
Top