Snowmobile Fanatics banner

1 - 16 of 16 Posts

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #1 ·
Following parts are all for sale, and I will entertain all offers:

-6" polished Aluminum FLY pivot risers, will fit all manufacturers, comes with all needed hardware, 7/8" Diameter bars only, looks brand new. $113 new. B/O

2011111161055286_23162.jpg

-Powermadd pivot adapter (adds 1.25" of rise) with a 2" block. Pivot adapter Fits Polaris's with flat top steering posts, and the 2" block will fit any brand with 7/8" bars. combined they were $92 new. B/O

2011111161235692_23162.jpg
2011111161252707_23162.jpg
201111116139989_23162.jpg

-1 set of Black/White Powermadd Handguards, Star Series, great condition, come with aluminum mounts. $73 new. B/O

2011111161451207_23162.jpg

-Pro-Taper SE bars, 7/8" bar diameter, ATV low bend, great condition, no cracks, comes with bar-pad, around a 2" rise, they have Scott grips, but no heaters. Bars were $68 new, grips were $19 new. B/O

2011111161541457_23162.jpg
2011111161556176_23162.jpg
201111116167989_23162.jpg


-Powermadd 10" throttle cable extension, good condition, works fine. $34 new. B/O

2011111161726911_23162.jpg

-Red bar pad off a 2002.5 Pro-X. zippers closed, foam comes with it, decent condition. B/O

201111116184301_23162.jpg
201111116186645_23162.jpg
201111116188989_23162.jpg

-OEM Polaris mirrors, black in color, comes with mounting hardware, no cracks, great condition. B/O

2011110183941551_23162.jpg
2011110183938270_23162.jpg
2011110183935614_23162.jpg


I would be interested in any parts that will fit a 2003 Polaris Pro-X 600.
 

Attachments

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #2 ·
Package deal #1: Handlebars/grips/pad, 3.25" Powermadd Riser setup, Powermadd handguards with mounts, throttle extension.
$160 shipped.


Package deal #2: Handlebars/grips/pad, 6" FLY riser, Powermadd handguards with mounts, throttle extension.
$175 shipped.

Package deal #3: Handlebars/grips/pad, 6" FLY riser, 3.25" Powermadd riser setup, Powermadd handguards with mounts, throttle extension.
$215 shipped.

Package deal #4: Handlebars/grips/pad, 3.25" Powermadd riser setup, Powermadd handguards with mounts, throttle extension, bar pad/foam and the mirrors.
$180 shipped.


Package deal #5: Handlebars/grips/pad, 6" FLY riser, Powermadd handguards with mounts, throttle extension, bar pad/foam and the mirrors.
$200 shipped.

Package deal #6: Handlebars/grips/pad, 6" FLY riser, 3.25" Powermadd riser setup, Powermadd handguards with mounts, throttle extension, bar pad/foam and the mirrors.
$230 shipped.

Package deal #5: Handlebars/grips/pad, 3.25" Powermadd riser setup, Powermadd handguards with mounts, throttle extension, bar pad/foam, mirrors and a Klim F4 helmet with 509 Sinister goggles with two lenses.
$400 shipped.


Package deal #6: Handlebars/grips/pad, 6" FLY riser, Powermadd handguards with mounts, throttle extension, bar pad/foam, mirrors and a Klim F4 helmet with 509 Sinister goggles with two lenses.
$425 shipped.



Helmet:

Klim F4, Size L (fits like an XL), only worn 4 times, looks new, and pretty much is new, 509 Sinister goggles, two lenses, helmet is light, comfortable and the helmet, goggles with lenses are over $500 new.

$230 shipped (In the US).

2010127223924828_23162.jpg

201012722392715_23162.jpg

I also have a Edge chassis front bumper, stock black bumper, good condition. AND a Pro-XR polished aluminum front bumper, awesome condition, and a stock muffler from a Pro-X 600, looks brand new, no rattles or broken baffles.
 

Attachments

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #4 ·
xcsp_rider said:
how much for just the protaper bars? any it come with brake and throtte lever and grips on it right ?
Just bars/bar pad/grips. No throttle block, or brake master cylinder. The bars DO NOT have heaters, so the grip can be taken off to remove the throttle block.

They were almost $90 new. I'd do $40 + ship. The more you buy, the cheaper it gets!
 

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #5 ·
-black Edge/Pro-X chassis front bumper, good condition, no cracks or dents. $20

looks like this:
http://cgi.ebay.com/ebaymotors/Polaris-Front-Bumper-02-05-500-600-700-800-rmk-xc-/280321412582?pt=Snowmobile_Parts_Accessories&hash=item4144754de6#ht_1458wt_939

-polished aluminum Pro-XR front bumper (fits any Pro-X or Edge chassis), like new, mirror shiny, no cracks or dents. $30

looks like this:
http://cgi.ebay.com/ebaymotors/Polaris-Pro-XR-Race-Front-Bumper-Edge-XCSP-/160528407415?pt=Snowmobile_Parts_Accessories&hash=item25603d1b77#ht_500wt_1182


your choice of 1 FREE if Package deal #5 or #6 is purchased. All prices are OBO.

OR the Black front bumper is FREE if Package deal #4 is purchased, $10 if Package deal #3 is purchased.
 

·
Registered
Joined
·
446 Posts
jesse500 said:
xcsp_rider said:
how much for just the protaper bars? any it come with brake and throtte lever and grips on it right ?
Just bars/bar pad/grips. No throttle block, or brake master cylinder. The bars DO NOT have heaters, so the grip can be taken off to remove the throttle block.

They were almost $90 new. I'd do $40 + ship. The more you buy, the cheaper it gets!
would you sell it with throttle block and brake cylinder?
 

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #7 ·
brake cylinder will not work on your sled. But I could give you the throttle block.

$55 + ship: Bars/Grips/Bar pad/Throttle block.

I also have a polished aluminum Pro-XR front bumper that would looks sweet on your sled. $40, just spent 3 hours sanding and polishing it.

$90 for the two + ship.
 

·
Registered
Joined
·
446 Posts
jesse500 said:
brake cylinder will not work on your sled. But I could give you the throttle block.

$55 + ship: Bars/Grips/Bar pad/Throttle block.

I also have a polished aluminum Pro-XR front bumper that would looks sweet on your sled. $40, just spent 3 hours sanding and polishing it.

$90 for the two + ship.
do you have a cell you could send pics of it to my cell? of the bars and grips, and how much would a brake cylinder cost
my number is 715-928-1711 send pics of it off the sled dont want the frint bumper i use my black one to move the sled quite a bit so it wouldnt work and for the brake cylinder we hav ethe same model polaris why wouldnt it fit.
 

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #9 ·
Also have:

-Stock Polaris muffler off a 2003 Pro-X (will fit any Pro-X or XcSp), very nice shape, no dents or broken pieces. B/O

-Sno Stuff Rumble Pack muffler for Polaris Edge or Pro-X chassis. very good shape. $170.
 

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #10 ·
$700 shipped for EVERYTHING! :O -> Bars/pad/grips/throttle block, 2 throttle extension, both risers, handguards/mounts, mirrors, Pro-X bar pad, both front bumpers, both mufflers, helmet/goggles/extra lens.
 

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #11 ·
Bars and handguards no longer available.

bump for the 6" FLY riser, 3.25" Powermadd riser, bar cover, mirrors, helmet and goggles.
 

·
Registered
Joined
·
351 Posts
I might be interested in pivot adapter minus the block , unless price is right for both, and also the mirrors. And are you able to ship to the states?
 

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #13 ·
Bar pad, bars, handguards, pivot adapter and 2" block sold.
 

·
Registered
Joined
·
2,450 Posts
Discussion Starter · #14 ·
Everything but the mirrors, 6" riser and both throttle extensions.
 

·
Registered
Joined
·
1,356 Posts
WHAT SIZE THROTTLE EXSTENSIONS DO YOU HAVE LEFT AND HOW MUCH SHIPPED TO 53952 WISCONSIN? DID YOU SELL THE RED POLARIS HANDLEBAR COVER?
 

·
Registered
Joined
·
1,356 Posts
MicahMan said:
WHAT SIZE THROTTLE EXSTENSIONS DO YOU HAVE LEFT AND HOW MUCH SHIPPED TO 53952 WISCONSIN? DID YOU SELL THE RED POLARIS HANDLEBAR COVER?
???????
 
1 - 16 of 16 Posts
Top