Snowmobile Fanatics banner
1 - 8 of 8 Posts

·
Registered
Joined
·
193 Posts
Discussion Starter · #1 ·
Have 2001 600 xcsp. Just installed V Force 3 reeds and it is running lean. What size jets are stock and what should I go with? 600 to 1500 ft. elevation. Normal temp range -10 to +30 Need the info as quick as possible. Thanks in advance!
 

·
Registered
Joined
·
15,722 Posts
420 Is what most guys run in that sled.....
 

·
Registered
Joined
·
193 Posts
Discussion Starter · #3 ·
Thanks xcr440. Appreciate the quick reply!
 

·
Registered
Joined
·
3,029 Posts
what are your current jets? If its running lean just move up one size and work from there?
 

·
Registered
Joined
·
193 Posts
Discussion Starter · #5 ·
Sled not in front of me right now... anybody know where I can find a jetting chart for this sled online?
 

·
Registered
Joined
·
193 Posts
Discussion Starter · #6 ·
Turns out 430's are stock on this sled, had to put 450's in to get golden brown plugs... Not sure if the new V Force reeds are causing that much more airflow or if I've got an air leak someplace... I will be doing quite a bit of plug checking for awhile to try to get to the bottom of it...
 

·
Registered
Joined
·
807 Posts
I would be checking your needle position first. Rich on main jet (450's) will still burn down on the trails if needle is dropped.
 

·
Registered
Joined
·
193 Posts
Discussion Starter · #8 ·
Raised needles up one position.
 
1 - 8 of 8 Posts
Top