Snowmobile Fanatics banner

1 - 4 of 4 Posts

·
Registered
Joined
·
335 Posts
Discussion Starter #1
I was looking at my sled and noticed that it lookes like the slides are wider than the track windows. I havent measured them so i dont know for sure.

Does anyone else know if the sleds will fit through the windows or not?

I hope not cuz that will suck if i have to drop the frame!
 

·
Registered
Joined
·
901 Posts
i had the same problem with my sled. i just trimmed a track window a little bit so the slide would fit through
 

·
Registered
Joined
·
4,983 Posts
Trim a window is what most Rev riders do. Or drop just the rear bolts from the skid and pull the skid off to the side of the track. That works too and is less work that total removal.
 

·
Registered
Joined
·
4,327 Posts
I take mine off all the time for grass drags, its tight but the track will stretch around the hyfax. Once i get it started i take a vice grip put it on the end of the hyfax thats sticking out the track window and bang it with a rubber hammer comes out pretty easy. Be carefull not to ruin the hyfax with the vice grips so you might want to wrap the hyfax in electric or some duct tape so you dont mark them when you clamp on the vice grips
 
1 - 4 of 4 Posts
Top