Snowmobile Fanatics banner
1 - 20 of 28 Posts

·
Administrator
1998 XCR 440
Joined
·
12,832 Posts
another yamaha triple. yay.



http://www.bolliger-mabillard.com

I Love B&M Coasters.
 

·
Registered
Joined
·
2,286 Posts
A buddy of mine rides one and loves it. He bought it new and stock, said he had it up to 115mph on a hard packed lake (according to the speedometer). Then the next year he put a clutch kit 144 studs, 10in carbides and a silencer on it. Those mods took a little away from the top end, but gave him a great hole shot and mid range. Great sled!
 

·
Registered
Joined
·
27 Posts
Take 1 layer out of head gasket,reed spacers,and get the clutching dialed in and these sleds rock.If you have any questions just ask .
I take it some on here either don't like triples or don't like yamahahahaha.later rpm
 

·
Registered
Joined
·
945 Posts
rpmsrx, that same thing applies to the MM sleds too right? Basically the same motor. do the chassis' differ much?

-----------------------------
I think.... therefore I sled
-----------------------------
Two '94 Indy XLT SKS
 

·
Registered
Joined
·
945 Posts
ROTFLMAOPIMP!!! He's not just a member, he's the president!!


-----------------------------
I think.... therefore I sled
-----------------------------
Two '94 Indy XLT SKS
 

·
Administrator
1998 XCR 440
Joined
·
12,832 Posts
LOL

Ok, I shouldn't have written yamahaha, and I fixed it.

I haven't bashed anything. I said it was another Yamaha triple. I am not a fan of triples. Just so you know my first sled ever was a yamaha. I have no problem with them.



http://www.bolliger-mabillard.com

I Love B&M Coasters.
 

·
Administrator
1998 XCR 440
Joined
·
12,832 Posts
<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>Originally posted by rpmsrx:

Take 1 layer out of head gasket,reed spacers,and get the clutching dialed in and these sleds rock.If you have any questions just ask .
I take it some on here either don't like triples or don't like yamahahahaha.later rpm

[/quote]

No problem with yamaha, not a big fan of triples though.

I can be a sarcastic person sometimes. I'm only human




http://www.bolliger-mabillard.com

I Love B&M Coasters.
 

·
Administrator
1998 XCR 440
Joined
·
12,832 Posts
This topic kinda went off track...



http://www.bolliger-mabillard.com

I Love B&M Coasters.
 

·
Registered
Joined
·
4,476 Posts
<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>Originally posted by Tfin70:

Tushea. (I'm not even going to try on the spelling) lol!

Ride to live...Live to ride.[/quote]

I do believe that you are thinking touché


Trees don't make the greatest brakes...
 

·
Administrator
1998 XCR 440
Joined
·
12,832 Posts
The triple pipes should actually make it work better. Usually the hotter the exhaust pipe, the better the performance.



http://www.bolliger-mabillard.com

I Love B&M Coasters.
 

·
Administrator
1998 XCR 440
Joined
·
12,832 Posts
Could be, I know when I got my sled, the pipe was not insulated, and I was advised to insulate it, so I did and my performance went up. But maybe the triple pipes on sleds like ZRT, SXR, XLT, STORM or whatever causes problems. I haven't heard of anything though.



http://www.bolliger-mabillard.com

I Love B&M Coasters.
 
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top