Snowmobile Fanatics banner

1 - 5 of 5 Posts

·
Registered
Joined
·
197 Posts
Discussion Starter · #1 ·
Piked up a three place inline Rance aluminum trailer It hasn't been use for sleds yet so I would like to put ski guides and track mats in it for easy loading and off loading and protection for the floor.The problem im having is laying out the ski guides.I know that the ski should be tight to the wall so that the other sled can fit staggered beside it.But the cables for the rear door assist are in the way Im posting pics for easier reference.Any info would be a big help

THX 2010819213833172_21419.jpg
2010819213853626_21419.jpg
2010819213917516_21419.jpg
2010819213936188_21419.jpg
201081921395432_21419.jpg
2010819214016704_21419.jpg
2010819214040797_21419.jpg
 

Attachments

·
Registered
Joined
·
458 Posts
650indy1 said:
Piked up a three place inline Rance aluminum trailer It hasn't been use for sleds yet so I would like to put ski guides and track mats in it for easy loading and off loading and protection for the floor.The problem im having is laying out the ski guides.I know that the ski should be tight to the wall so that the other sled can fit staggered beside it.But the cables for the rear door assist are in the way Im posting pics for easier reference.Any info would be a big help

THX 2010819213833172_21419.jpg
2010819213853626_21419.jpg
2010819213917516_21419.jpg
2010819213936188_21419.jpg
201081921395432_21419.jpg
2010819214016704_21419.jpg
2010819214040797_21419.jpg
not quite sure what your problem is with this? the cable is in the way so you want it that extra inch and a half over? or do i have the wrong picture?
 

Attachments

·
Registered
Joined
·
2,420 Posts
I would think it shouldn't be a problem on the door to move it out away from the cable. Inside the trailer you could move it tight against the wall where it matters.
 

·
Registered
Joined
·
197 Posts
Discussion Starter · #5 ·
THX for the info it looks like you angled the guides toward the walls just after the ramp I thought that might work but I wasn't sure.Do you have ski hold downs and do you run studs.I pick up some old conveyor belts from the local rock quarry I hope this will help with the stud damage to the plywood.





RMK-KING said:
My trailer is a little bigger but it gives you a idea on how you could do the driveout door.
2010325111553705_1554.jpg

2010325111620865_1554.jpg
 
1 - 5 of 5 Posts
Top