Snowmobile Fanatics banner
1 - 3 of 3 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter · #1 ·
2002 zr 600 cross country...im going through my rear suspension.had shocks rebuilt and revalved.now im stiffening the rear by moving the rear arm back to the third bolt hole in the rails.i moved the rod in front of the arm back one hole also.the rear arm is pretty tight between that bar and the rubber stops behind the arm.(1/4 inch)is this an issue?does the rear arm need to pivot backwards,or is this what is stiffening the ride up.seems good to go...keep in mind,i go 300lbs + (they dont call me fatsam for nothin)any feedback appreciated........
 

·
Registered
Joined
·
128 Posts
Yah its no big deal at all, the same thing on my polaris and it has never given me any problems.little rough riding thats it.
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #3 ·
so your saying that it should be stiff enough then,and the geometry is correct?????
Originally posted by pilotguy
[br]Yah its no big deal at all, the same thing on my polaris and it has never given me any problems.little rough riding thats it.
 
1 - 3 of 3 Posts
Top