Snowmobile Fanatics banner

41 - 60 of 88 Posts

·
Registered
Joined
·
2,951 Posts
700RMK136 said:
pol16 said:
Those are some nice looking sleds.I love the suspension in Racing_joe66 machine's,that's the stance I'm trying to get. Does anyone know what type it is (XTRA-10,12,CUSTOM?? Joe?? Thanks. JP
Racing_joes sled has a Custom front suspension. I would guess a 12 rear.
It looks like a xtra 12 up front. The front shocks arent stock tho. And the rear looks like a m-10
 

·
Registered
Joined
·
5 Posts
Hey nice sled how tall is ur handle bar riser

I have a 95-96 polaris xlt 600 I would like to put a 3-6 in handle bar riser on mine, but I don't know what length I should put on there I would like to be able to put the riser in with out changing any of the wiring .If this helps I am 5'11"
 

·
Registered
Joined
·
814 Posts
600_XLT_Polaris said:
Hey nice sled how tall is ur handle bar riser

I have a 95-96 polaris xlt 600 I would like to put a 3-6 in handle bar riser on mine, but I don't know what length I should put on there I would like to be able to put the riser in with out changing any of the wiring .If this helps I am 5'11"
You will most likely need extensions for that tall of a riser. I put a 2 1/2" riser on my XLT and needed longer throttle cables and my brake line is at its limit.
 

·
Registered
Joined
·
7 Posts
Thanks for answering my supsension questions guys, I thought it had to be custom. Well here's a pic of mine. 350 bucks for the sled, a couple of cans of paint, some decals, 2" Risers (not installed yet)and I just picked up an xtra-10 ffront and rear supspension this morning. Hopefully that fixes the ride a bit (it's pretty rough right
now). JP
 

·
Registered
Joined
·
15,722 Posts
No pic???^^^^
 

·
Registered
Joined
·
5 Posts
TRIPLEB said:
600_XLT_Polaris said:
Hey nice sled how tall is ur handle bar riser

I have a 95-96 polaris xlt 600 I would like to put a 3-6 in handle bar riser on mine, but I don't know what length I should put on there I would like to be able to put the riser in with out changing any of the wiring .If this helps I am 5'11"
You will most likely need extensions for that tall of a riser. I put a 2 1/2" riser on my XLT and needed longer throttle cables and my brake line is at its limit.
Did u have to mess with the wiring harness?
 

·
Registered
Joined
·
5 Posts
600_XLT_Polaris said:
TRIPLEB said:
600_XLT_Polaris said:
Hey nice sled how tall is ur handle bar riser

I have a 95-96 polaris xlt 600 I would like to put a 3-6 in handle bar riser on mine, but I don't know what length I should put on there I would like to be able to put the riser in with out changing any of the wiring .If this helps I am 5'11"
You will most likely need extensions for that tall of a riser. I put a 2 1/2" riser on my XLT and needed longer throttle cables and my brake line is at its limit.
Did u have to mess with the wiring harness?
Sense I have an older sled with the adjustable steering would I be able to run a 2in. riser with the stock steering block on top or would it move it to 2 1/2in.
 

·
Registered
Joined
·
5 Posts
xcr440 said:
1997Indy440 said:
20121219204340703_36999.jpg


my 1994 xcr 440 special. nothin special other than 85 hp, slp spider, polaris blue primary, 47.5 weights, slp rollers, polaris silver/blue secondary, 38mm carbs, rsi bar pad and in this pic it has 3 inch risers but they are off now. might do rsi race bend bars sometime. also have a radar run/grass drag setup for clutching andgearing but thats a secret
how you pulling 85 hp out of that 440 My 97 reed valved, ves 440 only has 93ish hp.....
When u had the 3 in riser on it did u have to change any thing?
 

·
Registered
Joined
·
344 Posts
Heres a couple pics of the actual sled my other pic was of the 440.





Mods in sig
 

·
Registered
Joined
·
56 Posts
91 Indy 500
144 studs
rebuilt engine 4 years ago 10 thou over
2002 edge suspension ..(got schematic here )

 

·
Registered
Joined
·
145 Posts
93 RXL, Plastic skis w/ carbides, SLP clutch kits primary and secondary, wisceo pro light pistons, ported-n-polished transfer ports,shaved heads, studded track and blue LED's in the rear tail section near the grab handle.
10573.jpg

2012212173525152_8959.jpg

12525.jpg

2012212173517496_8959.jpg
 

Attachments

·
Registered
Joined
·
9,980 Posts
JohnRXL said:
93 RXL, Plastic skis w/ carbides, SLP clutch kits primary and secondary, wisceo pro light pistons, ported-n-polished transfer ports,shaved heads, studded track and blue LED's in the rear tail section near the grab handle.
10573.jpg

2012212173525152_8959.jpg

12525.jpg

2012212173517496_8959.jpg
Are you running the stock chip?
 

·
Registered
Joined
·
145 Posts
Ugly_old_Poo_kid said:
JohnRXL said:
93 RXL, Plastic skis w/ carbides, SLP clutch kits primary and secondary, wisceo pro light pistons, ported-n-polished transfer ports,shaved heads, studded track and blue LED's in the rear tail section near the grab handle.
10573.jpg

2012212173525152_8959.jpg

12525.jpg

2012212173517496_8959.jpg
Are you running the stock chip?
yes.never thought i needed anything else unless I went to the triple pipes.
 

Attachments

41 - 60 of 88 Posts
Top