Snowmobile Fanatics banner

1 - 3 of 3 Posts

·
Registered
Joined
·
80 Posts
Discussion Starter · #1 ·
[/font=Comic Sans MS]
Hey all you fellow gear heads. I am working on gaining more clearance for my 2001 Polaris XC SP with the new 136" 2" luged track. I am looking at getting one tooth smaller drive sprockets (8 tooth) w/ the anti-ratchet version. Will this be enough for the front clearance? I have brackets to lower the back end. Would it be recommended to gear down the top gear in the chain case one tooth as well..I have a 23 tooth, would a 22 be enough?..I don't want to be buying belts all riding season. Thanks
 

·
Registered
Joined
·
3,435 Posts
go with specs from an Edge chassis, 2001 or 2002 RMK, i believe one of the 01s and some 02s came with 2" lugs. Goto www.partsland.com and search there and find ALLLLL the specs,info and P/N for the RMK to make your swap simple.
 

·
Registered
Joined
·
80 Posts
Discussion Starter · #3 ·
xc600rmk said:
go with specs from an Edge chassis, 2001 or 2002 RMK, i believe one of the 01s and some 02s came with 2" lugs. Goto www.partsland.com and search there and find ALLLLL the specs,info and P/N for the RMK to make your swap simple.
HEY Thanks xc600rmk, apreciate it. I will check it out.
 
1 - 3 of 3 Posts
Top