Snowmobile Fanatics banner

1 - 7 of 7 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hi everyone, i have a 2003 pro x 600 and it bogs like crazy at around 4500-5000rpm. If i hammer the throttle it goes but i have no low speed power. Also if i stop and let it idle for a few seconds and i start moving again it wont bog for like 10 seconds but then it's bog city if i hold the throttle around 4500-5000rmp. You guys have any idea's as to what might be causing this?
 

·
Registered
Joined
·
892 Posts
Welcome

2003? I would let the dealer worry about it.
 

·
Registered
Joined
·
2,573 Posts
agree to dealer, had similar problem on my mach 1...turned out to be a cluch setting
 

·
Registered
Joined
·
172 Posts
Not sure if you have a throttle positioning sensor on that machine, but if it's only having that problem at that throttle setting then the TPS would be my first suspect.
But I agree, the Dealer should be troubleshooting & fixing that for you.
 

·
Registered
Joined
·
2,573 Posts
NightTrain again good call!! Never thought of TPS, very probable cause, I think!
 

·
Registered
Joined
·
9 Posts
Discussion Starter #7
Originally posted by Alaskangold
[br]What RPM is it engaging at?
It enguges at around 3800-4000rpm. I got rid of alot of that burble in the low end by adjusting the fuel screws, but it still bog city at 4500-5000rpm.
 
1 - 7 of 7 Posts
Top