Snowmobile Fanatics banner

Maintenance Tip

486 Views 0 Replies 1 Participant Last post by  kimba466
I recently changed the chain case lubricant on my 1997 Indy Ultra. When I attemped to remove the drain plug (drip pan in place I might add) it seemed "frozen" To resolve this problem I gave it a shot of liquid wrench, let it sit for about 2 minutes, inserted the 3/16th allen wrench and gave it a few taps with a small ballpeen hammer. . . I said "tap" not pound. . .
after which it broke loose. To gain a little more tork on the allen wrench, I put a "box" end wrench over the long leg of the allen wrench (an old trick from my Dad). This must be performed with care so as not to "round" the hex socket on the drain plug.
kimba466 Ride Safe!
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.