Snowmobile Fanatics banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
yes i have a 1996 xlt with a one inch track just installed i geared it down one tooth on top which its at a 20 right now now i was wondering what any of you guys have tested on a sled like this or any recomendations.
 

·
Registered
Joined
·
110 Posts
i had a 95 xlt with the toughboy kit form slp so it could handle turning 9000rpm with the pipes, clutching what worked for me at sea level i had the 10m white weights and the polaris almond round spring in the primary and in the secondary i put a polaris silver/blue spring in the third hole of a 42/36/34 helix. i ran 21/37 for gearing for more topend stock should be 21/39 so for 500' it is up to you, i would try droping 2 teeth on top first so 19/39 sounds good to try. i never raced for 500 i always was racing in 1/2 to 3/4 miles. oh ya dont run any after market belts HPX is ok but i liked to run polaris #3211066 it is a top cog belt.
 
1 - 2 of 2 Posts
Top