Snowmobile Fanatics banner

1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
I have a 2000 Z 440 F/C.I wanted to put dual 32 mm Mikunis on like the 2000 Sno Pro fan but was unable to find them in pairs.So i found 34mm from a 1996 Z 440 fan and put them on and the sled started but was doggy till about 3000 rpm.Now it will not start again.There is no air box yet.Should i rejet the carbs to the jets from the 2000 32mm or not. The 34mm carbs i put on have a magnet in them for a magnetic switch.I took the switch off the carbs,but magnets are still in the carbs.Could this be a problem? Any help would be great.
 
1 - 2 of 2 Posts
Top