Snowmobile Fanatics banner

1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
I have a 2000 Z 440 F/C.I wanted to put dual 32 mm Mikunis on like the 2000 Sno Pro fan but was unable to find them in pairs.So i found 34mm from a 1996 Z 440 fan and put them on and the sled started but was doggy till about 3000 rpm.Now it will not start again.Should i rejet the carbs to the jets from the 2000 32mm or not.Any help would be great.
 

·
Registered
Joined
·
175 Posts
boggy because it was too rich. when it was running did you try to put the choke on a little bit. If it gets better you're too lean, worse you're too rich. Check the plugs and see they could be fouled out. My guess is your putting way to much fuel through the engine.
 
1 - 2 of 2 Posts
Top