Snowmobile Fanatics banner

1 - 20 of 27 Posts

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #1 ·
Just got back from the outlaw grass drags and i picked up a bunch of parts for the ultra. most where good deals to.

I got a new 8" riser for my sled and ditched the old homemade one.
201082918287513_30620.jpg

i got my new 136" rails.
2010829182819435_30620.jpg

I got a set of C&A skis for $100 and they are like 8" wide
2010829182659982_30620.jpg

Got a box of double woodys backers for $20 192 count.
2010829182727373_30620.jpg


96 1.4" studs

2010829182712826_30620.jpg

2010829182842795_30620.jpg


3 pair of C&A ski loops. (let me know if you need any, $20 a set)

2010829182741326_30620.jpg

And i got my tunnel extention for $30.

I sold alot of my parts that I dident need and used the money to get new things for my sled. I cant wait to get the track, skid and everything else installed on my sled.
I'm going to be tearing down the top end and bringing the cylinders to madcow to get port work done and I'm going to sent the heads to AAEN to have them matched to my pipes. This winter is going to be so different from last.

Did anyone else go to the grass drags? What deals did you get?
 

·
Registered
Joined
·
2,786 Posts
Got a Team Rapid Reaction secondary for $100, couple hyvo gears for $5, I was doing some buying and reselling. Came out about even with a IQ skid plate, IQ sno flap, 10-60 weights, 22t gear, 40t gear, 19 t gear and some other odds and ends. what did your trailer set up look like, where were ya?
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #3 ·
No trailer... Just a small car with parts laid out next to it on the ground. I had a pink towel covering my windshield to block the sun. there was also a set of C&A skis on my roof. I might have sold you somthin or you walked by. I was in the last row by a line of pinetrees.
It was a fun two days to say the least[thumb]
 

·
Super Moderator
Joined
·
11,677 Posts
sTOrMy96 said:
I got a set of C&A skis for $100 and they are like 8" wide
2010829182659982_30620.jpg
Pretty decent grab on the skis. They look like an older version of the C&A XT ski, which is 7 1/4" wide, and ultra aggressive; I have a set on my SnoPro. I see people asking $250-$300 for them all day long.
 

·
Registered
Joined
·
2,786 Posts
That was one hell of a deal then!! I was either wearing an SF shirt, or no shirt and a hat. Drawin in the chicks....[kiss]

I might be interested in your spot sharing idea at haydays. gotta see what I need to sell and if I get hop in with someone.
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #6 ·
The guy raced with them twice and did freestyle with them for one season but they arnt beat up from the trail. the only flaw with them is he crashed in sno-cross and a sled with studs ran the ski over so one of them is chewed up on the bottom a little.
I first saw the skis on Saturday and he said he wanted $240 for them. I came back today and asked how much as he was about to load them in his trailer and he was like $100 and you can haul them home instead of me hauling them home. so it was a deal and i couldn't be more happy.
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #7 ·
Well i finished up putting the skid togather and i got it and the track in the sled. I still have to attach the rear drop brackets to the tunnel and attack the tunnel extention. I also got the C&A skis on and it looks sick! I cant wait till winter now. Im goint to tear down the top end on the ultra today, and possibly run the cylinders up to MADCOW to have him do the portwork. It will be an interesting day.
Here are some pick and a vid of the days work so far.[thumb][:D]
Before

2010814102320205_30620.jpg


After.
201083013059904_30620.jpg
201083013111576_30620.jpg
201083013123998_30620.jpg
201083013136201_30620.jpg
20108301314845_30620.jpg
201083013159466_30620.jpg

http://www.youtube.com/watch?v=enqg3_BPeKo
 

Attachments

·
Registered
Joined
·
443 Posts
Did you have it running looks smokey in there.
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #9 ·
Yes i was, I couldn't resist the sound and smell. I just got in from the garage. The top end is off and I'm going to shower and hopefully run the cylinders up to madcow.
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #10 ·
I brought the cylinders up to madow yesterday, so today i pulled the rest of my motor and cleaned all the oil off it, painted a couple things to dress it up and put it back in the sled. in the process the motor tipped on its side and broke one of the piston skirts so now I'm looking into getting some aftermarket pistons. here are some pics from today, let me know what you think. I plan on painting the heads blue like the other parts and then getting the pipes ceramic coated when i can find the cash.

Also i took some pics of the motor mounts, how the holes had to be made into ovals, and the 1" riser blocks to get the motor to clear the steering post. I cant wait until i get the motor put back together!
2010831182746154_30620.jpg

201083118275829_30620.jpg

2010831182811232_30620.jpg

2010831182823341_30620.jpg

2010831182834701_30620.jpg

2010831182847248_30620.jpg

2010831182856279_30620.jpg

201083118298388_30620.jpg

2010831182919748_30620.jpg

2010831182931529_30620.jpg

2010831182945310_30620.jpg

2010831182957341_30620.jpg

201083118309279_30620.jpg

2010831183018670_30620.jpg

2010831183031810_30620.jpg

2010831183043888_30620.jpg

2010831183057623_30620.jpg

201083118319248_30620.jpg

2010831183121123_30620.jpg

2010831183132826_30620.jpg

2010831183145279_30620.jpg

2010831183157623_30620.jpg

201083118321045_30620.jpg
 

Attachments

·
Registered
Joined
·
3,130 Posts
Dude seriously, don't make me spend the money I get from my dirtbike when I sell it on a triple. Really nice looking sled man!
 

·
Registered
Joined
·
2,585 Posts
I can't believe it.It just keeps getting nicer.....
 

·
Registered
Joined
·
1,364 Posts
sTOrMy96 said:
I brought the cylinders up to madow yesterday, so today i pulled the rest of my motor and cleaned all the oil off it, painted a couple things to dress it up and put it back in the sled. in the process the motor tipped on its side and broke one of the piston skirts so now I'm looking into getting some aftermarket pistons. here are some pics from today, let me know what you think. I plan on painting the heads blue like the other parts and then getting the pipes ceramic coated when i can find the cash.

Also i took some pics of the motor mounts, how the holes had to be made into ovals, and the 1" riser blocks to get the motor to clear the steering post. I cant wait until i get the motor put back together!
2010831182746154_30620.jpg

201083118275829_30620.jpg

2010831182811232_30620.jpg

2010831182823341_30620.jpg

2010831182834701_30620.jpg

2010831182847248_30620.jpg

2010831182856279_30620.jpg

201083118298388_30620.jpg

2010831182919748_30620.jpg

2010831182931529_30620.jpg

2010831182945310_30620.jpg

2010831182957341_30620.jpg

201083118309279_30620.jpg

2010831183018670_30620.jpg

2010831183031810_30620.jpg

2010831183043888_30620.jpg

2010831183057623_30620.jpg

201083118319248_30620.jpg

2010831183121123_30620.jpg

2010831183132826_30620.jpg

2010831183145279_30620.jpg

2010831183157623_30620.jpg

201083118321045_30620.jpg

i really like the blue accents.
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #14 ·
Thanks guys! I was hesitent on painting things but i thought "what the heck, if i dont like it i got a ire wheel that will take it off." well it turned out great. Now i have to go and get some high temp paint for the heads and it will look great! I was amazed how well the motor cleaned up. I took and filled a 5 gal bucket with gas and let the motor soak for 3 hours and then took a little wire brush to it and its super clean now. I cant wait to put the motor back together and get it fired up. Its gonna be sick with the shaved heads and trail porting!
 

·
Registered
Joined
·
443 Posts
This is by far the best looking wedge chassis i have seen.
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #17 ·
I want to bring it to haydays just to get reactions out of people but i have no way to haul it there. plus i dont think the motor will be put together by then. who knows maybe someone would give me an offer on it that i couldent pass up.

Last year every time i stopped to fill up i spent at least a half hour at the gas station talking to people, showing the motor, and letting them take pictures. There has to be at least 200 pics of my sled taken by other people.
 

·
Registered
Joined
·
2,585 Posts
Oh man don't sell your baby!
 

·
Registered
Joined
·
1,555 Posts
Discussion Starter · #19 ·
No trust me it would take a HUGE offer to let it go. Put it this way... it would need to be enough to but an iqr chassis with a 1200 watercraft triple in it... that cost alotttttttttt!!!!!!!!!
 

·
Registered
Joined
·
2,585 Posts
sTOrMy96 said:
No trust me it would take a HUGE offer to let it go. Put it this way... it would need to be enough to but an iqr chassis with a 1200 watercraft triple in it... that cost alotttttttttt!!!!!!!!!
LOL ok, i can see that being worth it![thumb]
 
1 - 20 of 27 Posts
Top