Snowmobile Fanatics banner

1 - 17 of 17 Posts

·
Registered
Joined
·
787 Posts
Discussion Starter · #1 ·
I’m parting out a 1993 Polaris Storm. I’m in northern Wisconsin and am willing to ship just about anything except the chassis. Below is a list of the parts available with prices. All prices are before the cost of shipping.
Engine - 150
Pipes - 100
Can – 35
Carbs – 40
Windshield – 15
Primary Clutch – 40
Secondary -35
Hood – 80
Seat – 25
Track – 40
Rear Suspension – 50
Front Shocks – 40
Trailing Arms – 50 each or 80 for both
Radius Rods – 40 for all 4
Skis – 50
Spindles and ski saddle – 25 each

I have the entire sled so if you need something that isn’t listed please let me know. I can get pictures upon request. You can either contact me on here or thorough e-mail at [email protected] thanks
 

·
Registered
Joined
·
480 Posts
Is the windshield stock or aftermarket? Any rips in the seat?
 

·
Registered
Joined
·
480 Posts
How is the nose cone?
 

·
Registered
Joined
·
787 Posts
Discussion Starter · #4 ·
I'm not sure what the stock windshield looked like but this one is black and about 6-7 inches high, its in good shape. The seat needs a cover badly but is other wise fine. The nose cone is fine except the clear coat has begun to peel a bit.
 

·
Registered
Joined
·
9,987 Posts
What condition is the motor?

Shipping to 14568 via freight?
 

·
Registered
Joined
·
480 Posts
Can I get a picture of the windshield and nose cone then? Thanks.
 

·
Registered
Joined
·
1,624 Posts
do you have any risers, and what kind of skis, steel or plastic
 

·
Registered
Joined
·
787 Posts
Discussion Starter · #8 ·
The motor is in good condition to my knowledge. I haven't had it opened up and the sled had 3XXX miles on it or so. I'll try and get a qoute on shipping asap.


I'll get pics up later of the nose cone and windshield


The skis are steel. I have a 3 inch powermadd riser if your interested. I'll get pics of the skis and riser too.
 

·
Registered
Joined
·
1,624 Posts
Viper17 said:
The motor is in good condition to my knowledge. I haven't had it opened up and the sled had 3XXX miles on it or so. I'll try and get a qoute on shipping asap.


I'll get pics up later of the nose cone and windshield


The skis are steel. I have a 3 inch powermadd riser if your interested. I'll get pics of the skis and riser too.
how much for the riser.
Do you by chance have the throttle cable extention too?
 

·
Registered
Joined
·
787 Posts
Discussion Starter · #10 ·
Here are some pics

201078185118178_17651.jpg

201078185822632_17651.jpg

201078185913975_17651.jpg

20107819016991_17651.jpg

20107819123350_17651.jpg


I'd go 15 plus shipping for the riser, let me know. I don't have the throttle extension. The riser wasn't on the Storm so I didn't need the extension.
 

·
Registered
Joined
·
480 Posts
Thanks for the pictures. How much for the windshield and nose cone shipped to Salem, New Hampshire 03079.
 

·
Registered
Joined
·
787 Posts
Discussion Starter · #13 ·
I'll try and check on shipping for the nose cone and windshield tomorrow or saturday.



I got the e-mail and I will try and get pictures to you asap
 

·
Registered
Joined
·
787 Posts
Discussion Starter · #14 ·
I'm going to be out of town for a week starting today. I will get back to people asap when I get back, thanks for your patience.
 

·
Registered
Joined
·
36 Posts
Carbs are stock? Mikunis? What size?
 

·
Registered
Joined
·
787 Posts
Discussion Starter · #17 ·
Stock carbs, I can't imagine they aren't stock, I'll measure them and get back to you
 
1 - 17 of 17 Posts
Top