Snowmobile Fanatics banner
1 - 2 of 2 Posts

·
Registered
Joined
·
394 Posts
Discussion Starter · #1 ·
Hi guys,
Is there a so called "pigtail wire" with a female end on it that I can just plug into my voltage regulator plug and then plug my electric shield cord into the female pigtail wire end? Also seeing that I'm NOT mounting an rca connector on my dashboard do most people just leave the female plug out of the steering column by the gas cap or out of the handlebar pad under the brake handle?
Thanks, sparkyd31
 

·
Registered
Joined
·
1,005 Posts
brown and yellow wire off the voltage regulator that works best and you can mount your connector on the left side of the sled which is the side the wire comes off your shield.
http://www.snowmobilefanatics.com/forum/topic.asp?TOPIC_ID=51614
This link is when i needed help and polarisrich helped me out.
There is a pig tail wire on the voltage regulator but you may have to cut and strip the wire to make your connection. It is OK to have the RCA end hanging out under the handle bar pad.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top