Joined
·
127 Posts
Is there a suggested repair method for A/C plastic hoods. I have an old jag that needs repair in the hinge area. Any help would be appreciated this is a trade in for the F7. Tim
Plastic hood repairs
1 - 3 of 3 Posts
It is probably R.I.M. Urethane or similar material.
- Clean it with isopropyl alcohol only. Do not use a chlorine based cleaner.
- Then you can repair with a TP-E epoxy mixed in equal parts. Put a heat lamp on it for 15 minutes, sand, and paint.
You should be able to find TP-E epoxy at an auto parts place or an autobody repair shop.
Or try: http://www.crestauto.com/
- Clean it with isopropyl alcohol only. Do not use a chlorine based cleaner.
- Then you can repair with a TP-E epoxy mixed in equal parts. Put a heat lamp on it for 15 minutes, sand, and paint.
You should be able to find TP-E epoxy at an auto parts place or an autobody repair shop.
Or try: http://www.crestauto.com/
1 - 3 of 3 Posts
Join the discussion
Join now to ask and comment!