Snowmobile Fanatics banner

polaris carb mounts

487 Views 1 Reply 2 Participants Last post by  TriumphoverU
i just bought some new carb mounts for a 1990 indy 650. The new ones have a metal face with an o-ring in the center unlike the old ones that had a solid rubber face. Can anyone tell me if you can just bolt these on or do you need to use silicone also?
1 - 2 of 2 Posts
O-ring = Great silicone needed. If you look at your old ones, there is probably a raised portion of the rubber that is in the shape of an o-ring. Anyways, I would not use any type of sealant.

Polaris is my way out - Other people just use a door.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.