Joined
·
18 Posts
These are made to order dash plates, Thought i would show them off.
![2.jpg]()
![1.jpg]()
![3.jpg]()
![11.jpg]()
![21.jpg]()
![23.jpg]()
![32.jpg]()
![123.jpg]()
![1232.jpg]()
Polaris Wedge Dash Plates, They are back!!!
Join the discussion
Recommended Reading
-
Blue or Gold primary spring??
PolarisIn a stock set-up (93 XLT) what makes a blue spring better then the stock Gold one? With the stock gold my engagement is 4100 rpm with the blue its about 4600 rpm. The sleds seems to perform fine with the gold, there's no bog on take off. I know the higher engagement is closer to the power band...- 30
- 9K
-
XCR 440 owners.
Polaris[:)] Welcome XCR 440 owners and all sled owners. Questions mainly relating to XCR 440's.[:)] Ask away.....[:D] My Red Rocket break system was not working properaly. And these guys helped fix it....Thanks PierBridge.....- 7K
- 896K
-
700 cylinders on 600 block
PolarisBeen looking around and notice some people have put 700 cylinders on 600 block. I have some questions that I seem to not be able to find. Will it be a huge different for the money or will I be wasting time? Is this an easy project to do? Can the average back yard person be able to or is there...- 12
- 7K
-
99600xc · updated
-
Pro rmk wont hold rpms wot
PolarisHello it's been a while since I have been stumped. Not that I am such a good mechanic but rather my sleds have just been working great. I have a 2011 pro rmk 800 that I ran all winter and it didn't have any problems really. My kids had been using it mostly so i dont know when it started losing...- 1
- 1K
-
92 Polaris Indy RXL EFI turbo
PolarisI figured I'd show off the results of a month's work. It's a 92 RXL with a 136" conversion and a turbo. Currently running at 7psi on the stock injectors maxed out but since the other injectors arrived in the mail today I'll be able to turn the boost up soon. Still needs work on the clutching but...- 153
- 49K
-
baldur · updated
Join now to ask and comment!