Snowmobile Fanatics banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I'm building a mountain mod out of a storm 800. and a 2009 dragon I want to put the seat/tank on it! But have no idea how because of the high pressure fittings off the tank! Any help would be greatly appreciated. And also curious if anyone has done a dragon 155" track and skid convention onto a wedge. Videos/ procures with instructions would be very helpful thanks.
 

·
Registered
Joined
·
292 Posts
Hey guy... use the Searth feature... look for IQ seat on Gen2... MuscleD did an excellent thread on this. .. slightly different on a storm than the Gen 2. ... I did the swap on a 96 Ultra... easy enough.. little bit of problem solving.... if ur gonna run a 2" track ur gonna need 7 tooth drivers off an old Yammie. .. cheers!
 

·
Registered
Joined
·
292 Posts
Same as MuscleD... but I has to build a 1.5" sub frame to clear the rear cooler... like i said... use the search function. .. his build thread is on here!
 
1 - 5 of 5 Posts
Top