Snowmobile Fanatics banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,261 Posts
Discussion Starter · #1 ·
ok i HAD a frame to use as a go cart, but with the motor i want it wont work that well. i wanna use a 340, 400, or 440 engine, but with that engine i will b going at a good clip. so no suspention wouldnt b that good. so what im thinkin is that, ill go to the bike yard n cut off the front of 2 sport atv's. im thinkin ill take the left A arms of one n the right off the other. weld them together, n cut off what i dont need. i dont know what im going to do with the back end. ne sugestions? and if yall have done nethign liek this pics would b great thanks
 

·
Super Moderator
Joined
·
11,279 Posts
Put a swing arm on it like a ATV...
 

·
Registered
Joined
·
2,261 Posts
Discussion Starter · #3 ·
i was thinkin that but it would b real narrow in the rear n wide in the front. i want somthign wide
 

·
Registered
Joined
·
331 Posts
Oh, so you are looking to make a double-wishbone suspension on the front?
Why not do the same for the rear? (Of course that means that you will need to also make CV joints for the rear axle too..)
 
1 - 4 of 4 Posts
Top