Snowmobile Fanatics banner

1 - 11 of 11 Posts

·
Registered
Joined
·
2,378 Posts
Discussion Starter #1
I need to get a 133.5 rail extention for an edge chassie. The problem is Tracks USA doesn't make a 133.5 extention. Does anyone know where I could get one custom made? I would like a quality extention though, not some backyard home-made rail extention.
 

·
Registered
Joined
·
2,378 Posts
Discussion Starter #4
The hog is correct.
 

·
Registered
Joined
·
1,744 Posts
Thats not much difference, I wonder if you slid the wheels in all the way a 133.5 would work with the 136 extensions?
 

·
Registered
Joined
·
2,378 Posts
Discussion Starter #6
I asked the same thing to a man on the phone at Tracks USA and he gave me a no go on that idea.
 

·
Registered
Joined
·
2,384 Posts
I know you can move a 133.5 skid back to fit a 136 track. Probably wouldnt work to move the 121 back to fit the 133.5 track? Just throwing that out there.
 

·
Registered
Joined
·
1,696 Posts
move the wheels back but the track would start to hit the rails or the wheels wouldnt move back far enough
 

·
Registered
Joined
·
2,420 Posts
Give Edge Works a try. They don't accept the hyfax. I am running a set of theirs. They aren't the prettiest ones out there, but they work. www.edgeworksid.com
 

·
Registered
Joined
·
2,626 Posts
Originally posted by the_hog
[br]I know you can move a 133.5 skid back to fit a 136 track. Probably wouldnt work to move the 121 back to fit the 133.5 track? Just throwing that out there.
That's what I was thinking. Wouldn't 133.5 track fit a 121 skid, barely but wouldn't it fit?
 

·
Registered
Joined
·
71 Posts
I'm just thinking, couldn't you find a fabrication shop to machine a 136 down to a 133.5. A little cutting, welding, machining, and viola - a 133.5 skid. Just an idea. A good machinest can make pretty much anything out of aluminum. Just an idea to think about.
 
1 - 11 of 11 Posts
Top