Snowmobile Fanatics banner

1 - 4 of 4 Posts

·
Registered
Joined
·
101 Posts
Discussion Starter #1
To stiffen rear, do I turn the blocks on Torsion springs so they are at the highest point?

Also, what is the RSS block? How to adjust that is possible?

96 xcr 600 sp
 

·
Registered
Joined
·
33 Posts
Turn the block adjuster to the highest point to get the highest tension. The Rear sissor stop or RSS stops the rear sissor arm from collapsing to a certain point. The lower the setting the more wieght transfer you will get when taking off. On mine i have totally removed the rear sissor stops and it lifts the front end off the ground no problem.
 

·
Registered
Joined
·
101 Posts
Discussion Starter #3
The RSS, if i want stiffer rear to haul my fat but, which way should I adjust it?
Same as you did to get skis off ground?
 

·
Registered
Joined
·
957 Posts
for the stiffest setting have the block turned so it is pushing the sissor as far up in the tunnel as it will go... or so the rectangle is turned to be tall rather than flat.
 
1 - 4 of 4 Posts
Top