replacing pull cord on 2000 600 rmk

1 - 1 of 1 Posts

parvis

Registered

Joined Dec 29, 2001

1 Posts

Discussion Starter • #1 • Jan 2, 2002

I need to replace the pull cord (RMK 600 2000) 800 miles
anyone have any suggestions on how to do this or special considerations that i should know about

any tech sites that have illustrations???

I think i will change the oil/water pump belt at the same time

braap braap

1 - 1 of 1 Posts

Recommended Reading

I need help Identifying a part.

The Performance Tuning Shop

I have a 1993 Ski-Doo Safari Deluxe that I aquired through a garage sale and I found when I opened this part it appeared like it holds oil and it was empty. This is located next to the belt on the snowmobile. I attached photos of the part. If anyone can tell me what the part is it would be...
- 2
- 196
- G
  GTB03 · updated 5 mo ago
Dead Arctic Cat 600 EFI

The Performance Tuning Shop

I have a 97 AC 600 EFI Snow Special. The other day, my son was riding across the field and it died. I have spark. I have compression. I have dripped a little gas in the spark plug holes and tried to start. Nothing. Doesn't even try to start. I sprayed a little ether in the air intake, nothing. I...
- 2
- 709
- F
  fikey · updated 5 mo ago
starting problem please help

The Performance Tuning Shop

Ihave a 96 skidoo touring E I purchaced for my son. If I try to start it with the electric start, it it will roll over fine but will not fire. But if I use the pull start it will start with one or two pulls. also if I just tap the key a little, sometimes it will go.I have tried different...
- 4
- 398
- B
  blizzardlover · updated 6 mo ago
A coolant explosion

The Performance Tuning Shop

Hey all. I have a 98 Indy 500 RMK that I just had an incident with. I just picked up the sled one week ago and today had it die on me before it even warmed up. Day one after purchasing it I warmed it up slow and cruised around a local lake. Started playing in the powder a little and after...
- 3
- 586
- F
  FlatOverCrest · updated Mar 10, 2019
compatibility between 600 and 700 liberty twins

The Performance Tuning Shop

so im looking to get more power out of my sled. i have a 2009 iq shift 600 thats an off breed because in 09 they are cfi but mine in carb anyways its time for a crank shaft and im thinking about putting 700 cylinders and pistons in it as well for more power does anyone know if the 700 cylinders...
- 1
- 423
- D
  dtph600 · updated Mar 1, 2019