Snowmobile Fanatics banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,982 Posts
Discussion Starter · #1 ·
We pulled the trailer with our rxl home and put the sleds in the garage to start working. I already started to pull them apart and wanted to be 100% sure about this.

Can I take the 650 cylinders and carbs and put them on the RXL and run it without a problem?

Just wondering because we need to sell them and the 650 needs a crank, but the RXL needs cylinders and a piston. I was just going to switch one over but I found the intake size on the RXL is slightly smaller? So changing them all and just putting carbs on it should work? Then I can just sell the EFI off the RXL separate. And the Indy can just be sold for parts.
 

·
Registered
Joined
·
2,626 Posts
Yes you can run 650 cylinders in place of RXL cylinders. You can put carb boots from the 650 onto the RXL cylinders and run the 650 carbs too so you don't have to change the cylinders.
You will need a fuel pump obviously because the RXL has an electric fuel pump.
 
1 - 3 of 3 Posts
Top