Snowmobile Fanatics banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Like an idiot I decided to pull the front shock on the track because the rear suspension suddenly sagged. I've managed to get the shock back in but I pulled the bolt for the upper member above the shock, the one that goes down at about a 30 degree angle to the rear, and now when I pull the member down the holes don't line up to put the bolt back in. I've searched all over looking for a manual for the 'Bile and am not having any luck. It's a 2007 Trail RMK 550. Does anyone have a line for a manual? Polaris industries's site is not answering and internet searches turn up nothing but dead ends. My local dealer (Honda Suzuki of Salt Lake) isn't any help.
 

·
Registered
Joined
·
1,791 Posts
OK so I have to ask...you pulled the suspension out from the sled right? I always useds a ratched strap around the suspension to compress the suspension to line up bolt holes or what not. Go to

www.polarispartshouse.com

Should have a picture and help you out. Let us know if you dont get it it...pictures never hurt either.
 
1 - 2 of 2 Posts
Top