Snowmobile Fanatics banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello,

I just took two broken sleds off of the hands of a friend of mine (98 440 mxzx and a 97 500 summit). The engine is blown in the summit and the body of the mxzx is shot. My idea is to remove the good engine from the mxzx and put it in the summit. Does anyone know if this will work/fit?
 

·
Registered
Joined
·
2,546 Posts
I thould fit, but I wouldn't do it. I would rebuild the 500 and put it back in the summit. It should be cheap to do it.
 

·
Registered
Joined
·
3,100 Posts
flatlander_summit said:
I thould fit, but I wouldn't do it. I would rebuild the 500 and put it back in the summit. It should be cheap to do it.
Yep those fan cooled engines are cheap to rebuild.
 

·
Registered
Joined
·
2,304 Posts
Welcome to the site

Are they fan or liquid? Doo did have those two in both
What year are they?
If same year / or at least chassie, just switch over the ignition, cluthes and exhaust and you will be golden!
 
1 - 4 of 4 Posts
Top