Snowmobile Fanatics banner

ski doo experts please help

2K views 5 replies 4 participants last post by  Forumla3 
#1 ·
Please help
 
#3 ·
I posted 2 problems I am having with my sleds lastnite. I have a 2000 mxz 700 that after a "friend" so called cleaned and tuned carbs it now smokes bad when fire it up. Was wondering what screw on carbs should be set at. Also I have a 1998 mxz 440 air that after same person "fixed" now it will fire up and run for a bit but then will stall and won't restart. Pull plugs n they r black and soaked. Also the tail light wasn't working when I got 440 back and I noticed plug hangin out the side of seat. I pulled the seat n saw that there is 2 diff plugs coming out from under gas tank but only one coming out of seat. Plugged in the one that matched and now tail light works but no brake light. Bulb is good. Was wondering what 2nd plug cld be for?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top