Snowmobile Fanatics banner
1 - 4 of 4 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
hey
i have a problem with my snowmobile and i was wondering if you guys new what to do....
my case that covers my recoil has fell off and i was wondering if you guys new how i shoould put it on cause the bolts broke in side....
if you guys no anything plz tell me thanks
 

·
Registered
Joined
·
457 Posts
i beleive you will have to drill out those bolts and tap new threads with the correct size and get new bolts to match. unless the plate the recoil mounts to can come off ( i dont think so though) it is possible that it might be better to replace that if you are not familiar with tapping new threads.
 

·
Registered
Joined
·
14 Posts
drill out the bolt,
use a bit smaller than the dia. of the bolt.
no need to go all the way thru the bolt.
use an (easy-out) which you can pick up at your local auto store.
or you can carfully tap a screw driver into the drillde hole adn then turn it out.
eather way it beats retapping your bolt holes.
good luck,
just wish all problems were that easy.
 
1 - 4 of 4 Posts
Top