Snowmobile Fanatics banner
1 - 3 of 3 Posts

·
Registered
Joined
·
385 Posts
Discussion Starter · #1 ·
I'm not getting spark on my number 1 cylinder at start up. Why?

http://www.snowmobilefanatics.com/gallery/file.asp?id=13694&user=11835
 

·
Registered
Joined
·
1,056 Posts
1. Carefully check your wire connections from the CDI to the coil.
2. Carefully inspect (this means remove the coil so you can handle it), the sparkplug wire for cracks, places were the electricity can arc away to ground.
3. Carefully inspect your plug: porcelain cracked? Could be bad inside, try another.
4. Switch that coil to another position, does the problem follow the coil?
 

·
Registered
Joined
·
385 Posts
Discussion Starter · #3 ·
I know there was a crack in the wire. I fixed it with electrcal tape but I'm going to replace the wire and see if that solves the problem.
 
1 - 3 of 3 Posts
Top