Snowmobile Fanatics banner

1 - 4 of 4 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter #1
Would like to get a few jetting and needle set ups for my sled, don't need to burn it down starting off to lean. If anyone has an '01 800 non ves with psi twin pipes would greatly appreciate jetting advice. Also have a heelclicker clutch if anyone knows the weight and springs I might need to use.
Thanks, Jason
 

·
Registered
Joined
·
1,966 Posts
Hey Jason did you get any info with the pipes? Most of the time the aftermarket companies are on the rich side when it comes to jetting with their pipes. Call PSI and and they should be able to get you in the ballpark. I would also get an exhaust tamp guage. Riley
 

·
Registered
Joined
·
8,842 Posts
he said it best. past experience says get there recomendations and leave it fat for a while.
 

·
Registered
Joined
·
227 Posts
Discussion Starter #4
I'm getting them used so probably no literature. The guy I'm buying them from said he was running 490's, he told me to start at 500's. Does that sound right I'm at stock 450's now. And psi's website I can't ever get on to get a tech. hotline
 
1 - 4 of 4 Posts
Top