Snowmobile Fanatics banner

1 - 10 of 10 Posts

·
Registered
Joined
·
659 Posts
Discussion Starter · #1 ·
Ok so I have an XLT SKS skid XC-100 I think is what it is and I have an EXTRA 12 my question is can I take parts from the EXTRA 12 and put them on the other suspension (XC-100) so as to make the SKS extened rail skid into a long track EXTRA 12 so I have a extended track that sits up high like the EXTRA 12 I do have two tracks
 

·
Registered
Joined
·
3,130 Posts
Imo I would leave the xtra 12 alone and stretch it to a 136. You may have to put a new track on it but if it ever has to be replaced your putting a standard track on.
 

·
Registered
Joined
·
659 Posts
Discussion Starter · #3 ·
Then I would need to get rail extension would it not be easier to mount the EXTRA 12 arms and all the other hardware to the SKS rails which come extended from the factory that is basically my question can i take the parts from the EXTRA 12 and mount them to the SKS 135.5 rails ?
 

·
Registered
Joined
·
9,987 Posts
If you can weld aluminum, sure.. Otherwise, not very likely.
 

·
Registered
Joined
·
1,108 Posts
The holes are not the same, there 2 totally diffreent suspentions. if you want a 136 xtra12 get extentions if they even make them. The best thing would be get a edge 136 and it would set up like the 12 and then its a win win
 

·
Registered
Joined
·
632 Posts
Scan craigslist and fleabay, or even do a search on here in the classifieds.
 
1 - 10 of 10 Posts
Top