Snowmobile Fanatics banner

1 - 3 of 3 Posts

·
Registered
Joined
·
440 Posts
Discussion Starter #1
We finally put the motor in today! No pics yet.. as it's not permanatly in. But we finally got all the holes to line up and will need to build a new mount to put the front mounts on. Also need to power wash the sled out as there is a ton of metal shvings sitting in the bottom now. The motor will more than likely be finished next weekend! Then it's off to get the exhaust bent and put in. Should be ready to run by turkey day... Snow should be falling anytime here in Michigan....

PX
 

·
Registered
Joined
·
1,932 Posts
Right on, thanks for the update. Have you figured out what you are going to use for a can? I'm thinking that you will have depth issues with the pipes and even an aftermarket can. The ZRT & ZRT2 chassis is deeper than the ZR. Although it may still work ok if you are having to bend the exhaust pipes anyway. Can't wait to see pics.
 

·
Registered
Joined
·
440 Posts
Discussion Starter #3
actually.. going to use a stock muffler for the time being.... the sled I am using as reference has the stock muffler in it right now... and it humps along like a dog in heat.... here's a pic of it...[B)]/snofan/../images/users/px/98ZR440TCAT600Triple.jpg
 
1 - 3 of 3 Posts
Top