Snowmobile Fanatics banner

1 - 5 of 5 Posts

·
Registered
Joined
·
508 Posts
Discussion Starter #1
ok i know if you go to high elevation stuff has to be done to your sled..can some one please tell me what has to be done...one is efi one is carburated..thank you
 

·
Registered
Joined
·
2,539 Posts
Call your dealer, or check your jetting and clutching charts.
You have to put in different main jets in your carbs depending on elevation. The dealer will have the specs if you dont. Your motor will also put out less HP at higher elevations, so you need to lighten up the weights in the drive clutch as you get higher in elevation. Dealer has those specs too.
 

·
Registered
Joined
·
2,304 Posts
^^^^^^^^^^^^^^^^^^^^^
Yep
When I worked for a Doo dealer we were always installing altitude kits (jets and clutching)
Like ASpin said, call your dealer and they can tell you
 

·
Registered
Joined
·
2,304 Posts
Depends on what you need......call a doo dealer and they can tell you what you need, then source out the stuff
 
1 - 5 of 5 Posts
Top