Snowmobile Fanatics banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
The sled: 1996 600 XCR SP

The problem: I am sure you can guess.... Anyway, got sick of changing jets with every temp. change so I installed dial-a-jets. Before installing this set-up, I finally had the sled rockin' the clutching was perfect, had jetting figured out etc.... Now the sled moves pretty good out of the hole, but bogs heavily at around 70 mph. It doesn't wanna clear itself no matter how much I feather the throttle. I have tried every kind of main jet combination, no improvements. What should I fiddle with next.

Any and all input would be appreciated.

Jamie
 

·
Registered
Joined
·
133 Posts
How old is your primary spring, could be shifting out to quick.
 

·
Registered
Joined
·
1,744 Posts
I have an almond EPI spring on my XCR sp. Really picks up good and dosent bog at all.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
Primary clutch is a new Comet clutch, put it on last year. Clutch was prepped for the xcr sp by the supplier. I will hae to go back and look at the spec's of it, and get back to you on that.
 
1 - 4 of 4 Posts
Top