Snowmobile Fanatics banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2,916 Posts
Discussion Starter · #1 ·
Looking for the torque specs for a 96 XLT SP. Mainly the crankcase specs and the torque pattern. the one i found online for the triples is a 20 bolt, i have 22 bolts on my case. thanks

Brendan
 

·
Registered
Joined
·
5,400 Posts
Okay here we go. Here's the order. The spec is...

8mm - 17-18 ft-lbs
10mm - 23-25 ft=lbs


21..17..13..9..3..1..5...7...11..15..19
PTO...........................................Mag
22..16..12..8..6..2..4..10..14..18..20
 

·
Registered
Joined
·
2,916 Posts
Discussion Starter · #3 ·
the 8mm and 10mm refer to socket size or thread size? all my bolts on the bottom end are 12mm socket size.

do the end bolts require any special torqueing?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top