Snowmobile Fanatics banner

1 - 7 of 7 Posts

·
Registered
Joined
·
634 Posts
Discussion Starter · #1 ·
Puttin my sled back together and was wondering if the 12 is wider than the 10. Bought the xtra 10 radius rods and ifs bars and putting them on my 89. Im having some trouble with the r-rods and figuring out how wide/long they should be. or if i can just measure my xlt and use that as a reference.
Any help would be great guys.[thumb]
2010930164847468_30823.jpg
2010930164918593_30823.jpg
 

·
Registered
Joined
·
2,731 Posts
xtra 12 rad rods are longer.

In order to use xtra10 radius rods in the 8-inch chassis, you need non-CRC xtra 10 rods. The non-CRC have equal length radius rods, where the more common CRC have unequal length radius rods.
 

·
Registered
Joined
·
634 Posts
Discussion Starter · #3 ·
ok thanks. so any pointers as to were to set the rods on the extra 10?
 

·
Registered
Joined
·
2,731 Posts
I don't have any rods to measure how long an x-10 is, sorry
 

·
Registered
Joined
·
634 Posts
Discussion Starter · #5 ·
thats alright. any one else know or know where i can find out how long they should be? I think the width of those x-10 sleds was 41" right? But were do i measure that from? Middle of spindles?
 

·
Registered
Joined
·
161 Posts
If I remember the 41" is center to center of skis. I guess thats the same as center of spindles.
 

·
Registered
Joined
·
634 Posts
Discussion Starter · #7 ·
cool ill start there.
 
1 - 7 of 7 Posts
Top